These repair kits are for the Crown pullrod 125237-XXX. Most of the time these pullrods fail on one end, or both. It is unnecessary to replace the entire pullrod, which is heavy and expensive. All you need is one of our kits!
CR 9774 replaces the threaded end of the pullrod. Just cut the broken end off, and weld our kit in.
CR 9775 fixes the other end of the pullrod. Sometimes the OEM bushings wear through and cause a blowout of the donut. Not only can you replaces this end with our kit, but we upgrade the bushings to 660 Bronze, which wears much longer.
 CR 9774 |
 CR 9775 |
